U-Pree Electronics Co., Ltd.
General
Description
Photoresistors are thin film devices which resistance changes with change of the light falling on it.(see fig.1)This product specifications provides the mechanical data,electronic characteristics and test conditions of PREE photoresistors of 5mm,12mm,20mm type.
Fig.1
Outline dimensions (see fig.2-fig.4)
Note:All dimensions are in mm and NTS.
Electronics characteristics (see tab.1-tab.3)
Tab1 (5mm type)
Model | Vmax (VDC) | Pmax （mW） | Ambient Temp （°C） | Spectral Peak (nm) | Photo Resistance (10Lx) (KW) | Dark Resistance (MW)min | g min | Response Time (ms) | |
Rise | Decay | ||||||||
PGM5506 | 100 | 90 | -30 ~ +70 | 540 | 2 ~ 6 | 0.15 | 0.6 | 30 | 40 |
PGM5516 | 100 | 90 | -30 ~ +70 | 540 | 5 ~ 10 | 0.2 | 0.6 | 30 | 40 |
PGM5526 | 150 | 100 | -30 ~ +70 | 540 | 8 ~ 20 | 1.0 | 0.6 | 20 | 30 |
PGM5537 | 150 | 100 | -30 ~ +70 | 540 | 16 ~ 50 | 2.0 | 0.7 | 20 | 30 |
PGM5539 | 150 | 100 | -30 ~ +70 | 540 | 30 ~ 90 | 5.0 | 0.8 | 20 | 30 |
PGM5549 | 150 | 100 | -30 ~ +70 | 540 | 45 ~ 140 | 10.0 | 0.8 | 20 | 30 |
PGM5616D | 150 | 100 | -30 ~ +70 | 560 | 5 ~ 10 | 1.0 | 0.6 | 20 | 30 |
PGM5626D | 150 | 100 | -30 ~ +70 | 560 | 8 ~ 20 | 2.0 | 0.6 | 20 | 30 |
PGM5637D | 150 | 100 | -30 ~ +70 | 560 | 16 ~ 50 | 5.0 | 0.7 | 20 | 30 |
PGM5639D | 150 | 100 | -30 ~ +70 | 560 | 30 ~ 90 | 10.0 | 0.8 | 20 | 30 |
PGM5649D | 150 | 100 | -30 ~ +70 | 560 | 50 ~ 160 | 20.0 | 0.8 | 20 | 30 |
PGM5659D | 150 | 100 | -30 ~ +70 | 560 | 150 ~ 300 | 20.0 | 0.8 | 20 | 30 |
Tab2 (12mm type)
Model | Vmax (VDC) | Pmax (mw) | Ambient Temp （°C） | Spectral Peak (nm) | Photo Resistance (10Lux)(KW) | Dark Resistance (0Lux)(MW) min | g min | Response Time (ms) | |
Rise | Decay | ||||||||
PGM1200 | 250 | 250 | -30 ~ +70 | 560 | 2~5 | 1.0 | 0.6 | 30 | 40 |
PGM1201 | 250 | 250 | -30 ~ +70 | 560 | 4~10 | 2.0 | 0.7 | 30 | 30 |
PGM1202 | 250 | 250 | -30 ~ +70 | 560 | 8~20 | 5.0 | 0.7 | 30 | 30 |
PGM1203 | 250 | 250 | -30 ~ +70 | 560 | 18~50 | 10 | 0.8 | 30 | 30 |
PGM1204 | 250 | 250 | -30 ~ +70 | 560 | 45~150 | 20 | 0.8 | 30 | 30 |
PGM1205 | 250 | 250 | -30 ~ +70 | 560 | 140~300 | 20 | 0.8 | 30 | 30 |
Tab3 (20mm type)
Model | Vmax (VDC) | Pmax (mw) | Ambient Temp (°C) | Spectral Peak (nm) | Photo Resistance (10Lux)(KW) | Dark Resistance (0Lux)(MW) min | g min | Response Time (ms) | |
Rise | Decay | ||||||||
PGM2000 | 500 | 500 | -30 ~ +70 | 560 | 2~5 | 1.0 | 0.6 | 30 | 40 |
PGM2001 | 500 | 500 | -30 ~ +70 | 560 | 4~10 | 2.0 | 0.7 | 30 | 30 |
PGM2002 | 500 | 500 | -30 ~ +70 | 560 | 8~20 | 5.0 | 0.7 | 30 | 30 |
PGM2003 | 500 | 500 | -30 ~ +70 | 560 | 18~50 | 10 | 0.8 | 30 | 30 |
PGM2004 | 500 | 500 | -30 ~ +70 | 560 | 45~150 | 20 | 0.8 | 30 | 30 |
PGM2005 | 500 | 500 | -30 ~ +70 | 560 | 140~300 | 20 | 0.8 | 30 | 30 |
Notes
1. Light Resistance:
Measured at 10 lux with standard light A (2854K-color temperature) and 2hr. preillumination at 400-600 lux prior testing.
2.Dark Resistance :
Measured at 10th seconds after closing 10 lux.
3.Gamma characteristic:
Under 10 lux and 100 lux and given by
γ=log(R10/R100)/ log(100/10)=log(R10/R100)
R10, R100: resistance at 10 lux and 100 lux.
4.Pmax:
Max power dissipation at ambient temperature of 25℃.At higher ambient temperature,the maximum power permissible may be lowered.
5.Vmax:
Max voltage in darkness that may be applied to the device continuously.
6.Spectral peak:
Spectral sensitivity of photoresistors depends on the wavelength of light they are exposed to and in accordance with fig 5. The tolerance of spectral peak is ±50nm.
Fig.5
Test
TEST/TEST CONDITIONS | PERFORMANCE |
Solderability Put the terminals into welding tank at temp. 230±5°C for 2±0.5s(terminal roots are 5mm away from the tin surface). | wetting:>95%
|
Change of temperature in accordance with: TA: -40°C TB: +60°C Number of cycles:5 Exposure duration: 30min | Drift of R10 = ± 20% No visible damage |
Constant low temperature Temperature: -45±2°C Duration: 48h | Drift of R10 = ± 20% No visible damage |
Constant humidity and heat: 1. Put the device in test box at Temperature: 60±5°C Humidity: 90-95% Illumination:0lux Duration: 100h 2. Take the device and measure after24h at normal temperature and humidity. | Drift of R10 = ± 30% No visible damage |
Constant load Temperature: 25±5°C Illumination: 150lux at rated power Duration:600h | Drift of R10 = +50/-25% No visible damage |
Strength of the wire terminals Bend the wire terminal at its root to 90 degree, and then bend it to a opposite direction. | No visible damage |
Vibration Frequency: 50Hz Swing: 1.5mm 2 directions: parallel to ceramic substrate normal to ceramic substrate Duration: 2h | No visible damage |
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
U-PREE
Service Hotline：
+86 137 092 58632
Address：6-501, Rongxun IP, Xiangji St, Chang'anDist, Xi'an, China 710119
Mail box： zhaogelin@21cn.com / 1029599385@qq.com
URL： www.u-pree.com
ISO9001
RoHs
REACH
Copyright ©2025 U-Pree Electronics Co., Ltd. All Rights Reserved
Copyright ©2025 U-Pree Electronics Co., Ltd. All Rights Reserved Powered by: WZTX LOG IN 陕ICP备2023013258号-1
Mail box1